產品好處
- 翻新飾面鍍膜
- 噴出濃厚泡沫
- 為車身帶來強勁SIO2保護
- 一次過洗車及保養，節省時間
- 帶出亮麗光澤
特別二氧化硅配方
HydroSuds 配合了納米SIO2科技，能夠留下無與倫比的鍍膜保護力和亮麗光澤。只需一抹，就能妥善保護車身，在表面加上防水的二氧化硅外層，有效對抗液體、污垢和塵埃等污染物，確保車輛乾淨耐看！若車身未飾面，可以用HydroSuds 加上防水功能；若車身已飾面，可以在洗車過程中用HyrdoSuds 翻新鍍膜層！
延長鍍膜壽命
HydroSuds 帶有SIO2成分，能夠在簡單洗車過程中翻新任何鍍膜！HydroSuds 適用於鍍膜、密封層和蠟層上，專門提升飾面耐力、激亮並帶來防水效果，是完美的優化洗車液！只需用30-60毫升HydroSuds， 就能輕鬆洗車，留下亮麗光澤！
如何使用
- 搖勻後將30亳升至90亳升洗車液稀釋至19公升清水內，或加至950亳升的泡沫槍液體缸內。如想達到更佳清潔效果，建議使用Chemical Guys 的TORQ 泡沫槍和雪尼爾洗車手套。
- 用清水預洗車身，去除污垢。
- 如用TORQ 泡沫槍：給車身噴上濃厚泡沫，以防車漆被刮落。
- 用雪尼爾洗車手套， 浸入水桶內， 清潔車身或抹走車身泡沫。
- 用清水沖洗車身。
- 用超細纖維毛巾抹乾車身。
Product Features:
- Recharge your ceramic coating
- Shoot incredible suds like you’ve never seen
- Leave behind SiO2 protection
- Save time by washing and protecting in one step
- Reveal amazing gloss and shine
Special Silica-Rich Formula Protects
HydroSuds is infused with nano SiO2 that leave behind ceramic protection and incredible gloss with every wipe of your mitt. HydroSuds offers a good level of protection alone, leaving a silica-rich film behind that helps repel water, dirt, and other pollutants, keeping your car cleaner longer. Use it on a non-coated car to add water beading properties, or on a coated car to revitalize your ceramic coating with a simple wash and dry!
Unleash Suds Like You've Never Seen
Shoot thick foam like you’ve never seen before with HydroSuds, then watch as the unbelievably thick foam sticks hard to your paint, gently encapsulating the abrasive dirt and grime and guiding it off your paintwork for an ultra-glossy scratch-free finish. This advanced hyper-concentrated formula only requires 1 – 2oz to generate truly incredible amounts of thick foams suds in your foam cannon, gun, or bucket!
Extend The Life Of Your Ceramic Coat
HydroSuds is mixed with SiO2, the main ingredient in ceramic coats, which revitalizes your coating by simply washing your car. The perfect aftercare soap, HydroSuds improves durability, gloss, and beading of any existing ceramic coating, sealant, or wax. Just 1-2oz of this hyper foaming formula helps maximize the life of your coating while refreshing the look and leaving behind a glass-like finish.
<How to use>
1. Shake well and add 1 to 3 oz to 5 gallon bucket or 32 oz solution tank of foam cannon or gun.
2. Pre rinse vehicle to remove loose dirt and debris.
3. Foam cannon or gun: spray vehicle with thick wash foam to protect the paint against swirls and scratches.
4. Wash surface with wash mitt and soapy solution.
5. Rinse using clean water for perfect shine.
6. Dry with a premium microfiber towel.
