V36光學級鏡面拋光劑 V36 OPTICAL GRADE CUTTING POLISH [ GAP_V36 ]

CAPACITY 容量

Kuantitas

Ringkasan

+
V36 Optical Grade Cutting Polish is the great all-around cutting-polish that eliminates light to moderate paint defects and imperfections from all paint types, then finishes like a fine polish. V36光學級鏡面拋光劑通用又強大,能夠復修車漆上較輕微的瑕疵,並在超硬油漆面上填補缺憾,最後為車身拋光作結尾!

Rincian Produk


<How to Use>
Dual Action Polisher:

1.Shake well and apply 4-5 drops to desired pad. 
2.Prime pad with Pad Conditioner. Dab product out evenly across 2' x 2' section. 
3.Turn on machine on paint to speed setting 1 to spread product. 
4.Increase speed to 5-6 and using moderate pressure, work area in 2-3 passes until product becomes clear.
5.Follow with light pressure to finish. 
6.Remove residue with a clean microfiber towel.
7.Please Note: Always try a test spot before use.

Rotary Polisher:

1.Shake well and apply 4-5 drops to desired pad. 
2.Prime pad with Pad Conditioner. Dab product out evenly across 2' x 2' section. 
3.Turn on machine away from paint to a setting in between 1000-1500 rpms to spread product. 
4.Using just the weight of the machine (no pressure) work area in 3-4 passes until compound becomes clear.
5.For final pass adjust speed setting to between 1200-1800 rpms.
6.Work until optical clarity is achieved.
7.Remove residue with clean microfiber cloth.

[如何使用]
如使用雙重動力拋光機:
1. 搖勻拋光劑,在墊上塗上4-5滴
2. 在墊上加上柔順劑後,每次以61cm² 面積塗抹車身
3. 把拋光機力度調至1,以確保塗層均勻
4. 把拋光機力度調至5-6,配合適度壓力,來回擦拭表面2-3次
5. 用拋光機輕力擦拭表面,以作飾面
6. 用超細纖維毛巾清除表面殘留物
7. 請注意:使用產品前請先在一角測試產品效果

如使用旋轉式拋光機:
1. 搖勻拋光劑,在墊上塗上4-5滴
2. 在墊上加上柔順劑後,每次以61cm² 面積塗抹車身
3. 帶拋光機遠離車身,然後把力度調至1000-1500rpms
4. 不加壓力地來回擦拭表面3-4次,以混和塗層
5. 把拋光機力度調至1200-1800rpms,再次擦拭以作飾面
6. 擦拭至表面光亮清晰
7. 用超細纖維毛巾清除表面殘留物


需時:1-5小時
技術要求:高階
預備工序:清洗表面、去除污垢 
所需工具:雙重動力拋光機或旋轉式拋光機、超細纖維或海綿拋光墊、超細纖維毛巾、六角拋光墊
 

Anda mungkin juga suka