<How to Use>
Dual Action Polisher:
1.Shake well and apply 4-5 drops to desired pad.
2.Prime pad with Pad Conditioner. Dab product out evenly across 2' x 2' section.
3.Turn on machine on paint to speed setting 1 to spread product.
4.Increase speed to 5-6 and using moderate pressure, work area in 2-3 passes until product becomes clear.
5.Follow with light pressure to finish.
6.Remove residue with a clean microfiber towel.
7.Please Note: Always try a test spot before use.
Rotary Polisher:
1.Shake well and apply 4-5 drops to desired pad.
2.Prime pad with Pad Conditioner. Dab product out evenly across 2' x 2' section.
3.Turn on machine away from paint to a setting in between 1000-1500 rpms to spread product.
4.Using just the weight of the machine (no pressure) work area in 3-4 passes until compound becomes clear.
5.For final pass adjust speed setting to between 1200-1800 rpms.
6.Work until optical clarity is achieved.
7.Remove residue with clean microfiber cloth.
[如何使用]
如使用雙重動力拋光機：
1. 搖勻拋光劑，在墊上塗上4-5滴
2. 在墊上加上柔順劑後，每次以61cm² 面積塗抹車身
3. 把拋光機力度調至1，以確保塗層均勻
4. 把拋光機力度調至5-6，配合適度壓力，來回擦拭表面2-3次
5. 用拋光機輕力擦拭表面，以作飾面
6. 用超細纖維毛巾清除表面殘留物
7. 請注意：使用產品前請先在一角測試產品效果
如使用旋轉式拋光機：
1. 搖勻拋光劑，在墊上塗上4-5滴
2. 在墊上加上柔順劑後，每次以61cm² 面積塗抹車身
3. 帶拋光機遠離車身，然後把力度調至1000-1500rpms
4. 不加壓力地來回擦拭表面3-4次，以混和塗層
5. 把拋光機力度調至1200-1800rpms，再次擦拭以作飾面
6. 擦拭至表面光亮清晰
7. 用超細纖維毛巾清除表面殘留物
需時：1-5小時
技術要求：高階
預備工序：清洗表面、去除污垢
所需工具：雙重動力拋光機或旋轉式拋光機、超細纖維或海綿拋光墊、超細纖維毛巾、六角拋光墊
