尺寸 SIZE: 5" x 3" x 1.5" (2 Pack)
使用這款軟墊來：
- 節約用品，帶來最佳優化效果
- 大大降低刮花車身風險
- 輕鬆上蠟和密封劑
- 塗抹完美份量
- 均勻地塗上一層薄薄的塗層
專為認真優化的安全軟墊
這款軟墊由優質的70/30超細纖維物料造成，採用特別針法縫製，絕不會對車身帶來刮痕！100%可洗的優質物料包裹著蓬鬆柔軟海綿，方便調整擦拭力度，讓您輕鬆帶來完美優化效果。
優質無痕超細纖維
超細纖維混合了聚酯物和聚酰胺，透過調整比例來控制布料柔軟度。劣質超細纖維物料按80/20比例製成，容易刮花車身。為了帶來無痕優化效果，Chemical Guys的優質軟墊按70/30比例製成，特別柔軟，能夠大大降低刮花車身風險，帶給您最安全、暢順的優化體驗！
如何使用
1. 預先清潔將要上蠟的表面
2. 使用通用清潔劑、洗車液或專業清潔用品去除污垢、油脂和塵埃
3. 在軟墊上擠出3-6點任何Chemical Guys膏狀或凝膠狀產品
4. 輕輕在車身上按直線推動軟墊
5. 確保表面被一層薄薄的、均勻的塗層所覆蓋。直至再用前，請把軟墊存放在乾淨、乾爽的地方
需時：5-10 分鐘
技術要求：新手皆可
預備工序：清潔表面，用黏土清潔表面
* New towel / New Brush might lint and shedding
新毛巾/新毛刷可能會出現掉毛情況
Use This Applicator To:
- Save product and reduce waste with perfect results
- Drastically reduce risk of scratching surfaces
- Effortless spread sealant or wax
- Apply the perfect amount of dressing in a flash
- Spread an even, thin coat of product
The Safest Applicator for Serious Detailers
Microfiber Applicators are made with premium 70/30 blended microfiber and inside stitched two times to ensure that the edges never touch your paint and reduce the risk of scratching. Premium 100% machine washable microfiber fabric is wrapped around a plush, durafoam pad that delivers just the right amount of pressure to easily mold itself to the surface delivering the perfect amount of product.
Premium Grade Scratchless Microfiber
Microfiber is a miraculous blend of Polyester and Polyamide, and the ratio of the two determines the softness of the fabric. Low grade microfiber goods are made with 80/20 micorfiber, and can scratch paint. Chemical Guys Premium Grade Microfiber Applicators are made with 70/30 blended microfiber for an extra soft feel that drastically reduces the risk of scratching sensitive automotive surfaces. Chemical Guys Premium Grade Applicators are the safest and most versatile applicators for serious collectors, detailers, and enthusiasts!
HOW TO USE
- Clean the surface to be coated, protected, or dressed.
- Use an all purpose cleaner, car wash soap, or specialty cleaner to remove any embedded debris, dirt, grease, or grime.
- Apply 3 - 6 dots of any Chemical Guys cream or gel product onto the applicator pad.
- Gently spread the chosen product over the workpiece in straight lines.
- Work to ensure a thin, even coat over the entire surface. Store in a clean, dry place between uses.
