白光鏡面釉及封體劑 WHITE LIGHT HYBRID GLAZE AND SEALANT [GAP_620]

CAPACITY 容量

Kuantiti

Ringkasan

+
這款白光鏡面釉及封體劑最適合白色或淺色車。優質的激亮效果能夠為車身帶來深層滋潤和光澤,持久的密封功能還能同時復修瑕疵、去除污漬,令車身更完美! White Light is a premium gloss enhancer and sealant in one that adds extra deep wet shine, fills minor swirls and scratches, and cleans minor stains and imperfections on white and light colored cars.

Maklumat produk

白光鏡面釉及封體劑的好處:

  • 帶出白色車身自然光澤
  • 避免淺色車漆褪色情況
  • 為淺色車帶來深層滋潤的亮麗光澤
  • 填平凹凸不平車漆面,回復鏡面反射度
  • 帶來完美光澤

激亮並復修車身瑕疵

刮痕和漩渦痕跡就是任何優化者的剋星。白光密封上光劑採用了極優質精油,能夠深入車漆面,復修細微瑕疵。當車身回復完善,光亮度並會得以提升,帶來深層滋潤的亮麗效果!

保護脆弱淺色車漆

若不定期護理白色車,車漆便會褪色、變黃和氧化。這款白光上光劑專為淺色和白色車輛而設,能夠帶來深層滋潤的鏡面亮度,讓車身保持雪白外觀、更光亮、更出眾

如何使用

1. 在超細纖維軟墊或海綿上劑出3-5點上光劑
2. 為車身塗上一層薄薄的上光劑
3. 等待15分鐘,讓上光劑融入表面
4. 用超細纖維毛巾擦亮車身表面
5. 如需要,請等候30分鐘再上第二層上光劑

需時:15-45分鐘
技術要求:中階
預備工序:清洗表面、用黏土清潔表面
所需工具:超細纖維毛巾、超細纖維軟墊
 

Use This Glaze To: 

  • Bring out the natural brightness of white paint
  • Help prevent discoloration in light color paintwork
  • Give wet gloss to all light colored cars
  • Level out uneven clear coat for mirror reflection
  • Add a brilliant deep shine

Fill Swirls And Scratches, Get Shine

Swirls and scratches are the bane of any detailer’s existence. White Light Hybrid Radiant Finish is blended with ultra-refined oils that penetrate deep into light scratches and reduce their visibility. Once the scratches are filled, the whole surface appears flatter and better reflects light. White Light fills imperfections, enhances shine and depth, and makes cars look dripping wet!

Protect Vulnerable Light Colors

White Light gives any white finish a deep, lustrous, wet mirror shine. Untreated white paintwork can fade, oxidize, and turn yellow over time. White Light is one product that protects and enhances white paintwork to keep it as pure and white as the driven snow. Light vehicles treated with White Light look brighter, have more shine, and appear wetter than ordinary ones.

How to Use
1.Squeeze 3 - 5 dots of glaze onto a foam or microfiber applicator pad.
2.Apply to the entire vehicle in a thin, even coat.
3.Allow glaze to bond with surfaces for 15 minutes.
4.Buff off with a premium microfiber towel.
5.Once removed, allow 30 minutes of cure time before adding a second coat if desired.

Time: 15 – 45 Minutes

Expertise: Intermediate

Prep: Clean Surface, Clay bar

What Else You’ll Need: Microfiber Towels,  Microfiber Applicator Hand Pads

Anda mungkin juga berminat