黑光鏡面釉及封體劑 BLACK LIGHT HYBRID GLAZE AND SEALANT [GAP_619]

CAPACITY 容量

数量

简介

+
這款黑光鏡面釉及封體劑最適合黑色或深色車。令人讚嘆的上光效果能夠為車身帶來深層滋潤和光澤,持久的密封功能還能同時復修瑕疵、為車身添加一層保護,帶給您終極的視覺享受! Black Light is pure eye-candy for black and dark-colored cars. The amazing hybrid glaze adds tons of deep wet shine, fills in minor imperfections, and lays down a layer of durable sealant in one step!

商品详情

使用這款上光劑來:

  • 為黑色車帶來深層滋潤亮度
  • 跳過耗時的密封步驟
  • 在研磨或拋光前復修車身痕跡
  • 溫柔地清潔並激亮車漆面
  • 填平凹凸不平的車身,回復鏡面反射度

 

為黑色車帶來特別護理

若不定時護理黑色車,車漆便會褪色、氧化和顯出痕跡。這款黑光上光密封劑能夠帶來亮麗光澤,回復反射度!強勁激亮效果配合優質精油,將修復細微瑕疵,讓黑色車身發光發亮!

 

先進密封劑帶來的糖果光澤

陽光、水和空氣污染會對車身造成損毀,引致車漆褪色或脫落,特別是黑色車!這款密封上光劑採用了升級防紫外線配方,能夠防禦有害光線,並抵擋污染物、塵埃和腐蝕性粒子,有效保護黑色車身。

 

[如何使用]

1. 在超細纖維軟墊或海綿上劑出3-5點上光劑
2. 為車身塗上一層薄薄的上光劑
3. 等待15分鐘,讓上光劑融入表面
4. 用超細纖維毛巾擦亮車身表面
5. 如需要,請等候30分鐘再上第二層上光劑

需時:15-45分鐘
技術要求:中階
預備工序:清洗表面、用黏土清潔表面
所需工具:上蠟細纖維毛巾塊

 

Use This Glaze To: 

  • Give your black car a dazzling deep-wet shine
  • Skip the time consuming sealing step
  • Fill in swirls without cutting or polishing
  • Lightly cleanse paintwork for brightest shine
  • Even out paint surface for mirror-like reflection

 

Customized Care For Your Black Car

If left untreated, black paintwork fades, oxidizes, and shows scratches like no other color. Black Light protects and enhances black paint to give it back a sinister glowing reflection. The intense gloss enhancers and micro-refined oils in this glaze fill minor swirls and scratches, reducing their visibility, allowing the surface to better reflects light and glow with a dark mirror-like shine.

 

Advanced Sealants Lock In Candy Sparkle

Automobile paint faces a constant onslaught from the elements. Sunlight, weather, and pollution damage can degrade painted finishes over time, especially on black cars. Black Light contains premium UV inhibitors that block harmful  solar rays, protecting and maintaining the dark glow on your car. Black Light helps protect paintwork against pollution, brake dust, industrial fallout, and water spots. 
 

<How to Use>
1. Squeeze 3 - 5 dots of glaze onto a foam or microfiber applicator pad.
2. Apply to the entire vehicle in a thin, even coat.
3. Allow glaze to bond with surfaces for 15 minutes.
4. Buff off with a premium microfiber towel.
5. Once removed, allow 30 minutes of cure time before adding a second coat if desired.
 

Time: 15 – 45 Minutes
Expertise: Intermediate
Prep: Clean Surface, Clay bar
What Else You’ll Need:  Microfiber Applicator Hand Pads

 

你可能感兴趣的商品